CONNECTING THE WATER SUPPLY LINE TO THE REFRIGERATOR
There are several items that you need to purchase to complete this connection. You may find these items sold as a kit at your local hardware store.
•1/4" compression nut
•copper tubing
•ferrule
1.Slip the compression nut (A) on the supplied plastic tubing (B).
2.Tighten the compression nut (A) onto the 114" compression fitting.
-Slip the compression nut (C) (not included) and ferrule (not included) on copper tubing (not included) as shown.
3.Tighten the compression nut onto the compression fitting. Do not overtighten the compression nut (C).
f Plastic tubing
(Supplied) | Compression nut (A) | |
(1/4") (Supplied) | ||
| ||
| Compression fitting | |
| Compressionnut (C) | |
| (Supplied) | |
| (114")(Not supplied) | |
(Not supplied) |
| |
Ferrule |
| |
Copper tubing |
| |
Not supplied) | J | |
|
INSTALLING THE WATER FILTER
. Remove the water filter cover (1).
2.Remove the fixed cap by turning it counterclockwise. Keep the cap in a safe place for later use if you don't use the filter.
. Remove the water filter from the box and put a replacement indicator sticker on the filter as shown. Place the sticker on the filter that dates 6 months in the future. For example, if you install the water filter in March, put the "SEP" sticker on the filter to remind you to replace it in September. That way you'llknow
when it is time to replace the filter. Normally, a filter life is about 6 months.
NOTE: You should remove the upper glass shelf before installing water filters.
i;i;i;ii_iiil
Sticker
(month indicator)
. Remove the filter cap and insert the filter into the filter housing.
. Slowly turn the water filter 90° clockwise to align with the printing mark on the cover, locking the filter in position. Make sure to align the water filter label mark with the center of the cover filter printing as illustrated. Remember, do not overtighten.
(_ | Cover filter. | [_ |
4.Turn on water and check for any leakage.
13
