REMOVING THE REFRIGERATOR/
FREEZER ACCESSORIES
The Kenmore EliteTM
Before removing any accessories, remove all food from the accessory being removed. This will avoid breakage and/or personal injury.
Door Bins (Refrigerator and Freezer)
Injury may occur if the door bins are not firmly installed. Do not allow children to play with the bins. Sharp corners of the bins may cause personal injury.
NOTE: DO NOT adjust a bin full of food.
To remove and relocate:
1.Lift up on the bin to unlatch; then pull it straight out to remove from the door.
Shelves (Refrigerator and Freezer)
The tempered glass shelves are heavy. Use special care when removing them to avoid breaking them and/or personal injury.
To remove and relocate:
1.Slide the shelf out until the shelf support lines up with the opening in the side shelf retainer as shown.
2.Using both hands, tilt the shelf by lifting the right side as shown; then carefully remove the shelf from the refrigerator or freezer compartment.
2.After relocating the bin, slide it in the door above the desired location and then push down until it stops. This will lock the bin in place.
/J
3.Holding the shelf in a tilted position, insert the left side of the shelf on the desired shelf support; then lower the right side of the shelf until it is also supported.
4.Slide the shelf all the way in to lock it in position.
Drawers/Crispers (Refrigerator and Freezer)
To remove and replace a drawer:
1.Slide the drawer out until it stops.
2.Slightly lift up on the front of the drawer and slide it out to remove it from the refrigerator or freezer compartment.
)
3. Reverse the order to replace the drawer.
J
42
