Setting Oven Controls (con't)
Consumer Defined Control Features
Setting Temperature Display
The BROIL .............. and FLEX CLEAN @pads control the Fahrenheit
oven control can be programmed to display temperatures in Fahrenheit factory to display in Fahrenheit.
or Celsius temperature display modes. The or Celsius. The oven has been preset at the
INSTRUCTIONS | PRESS | DISPLAY |
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1.To tell if the display is set for Fahrenheit or Celsius press Broil
(Figure 1) and hold for 7 seconds; "550 °''will appear and "BROIL" will flash in the display and a beep will sound. If "F" appears, the display is set to show temperatures in Fahrenheit (Figure 2). If "C" appears, the display is set to show temperatures in Celsius (Figure 3).
2. Press _ | to switch between Fahrenheit or Celsius display |
modes. The display will show either "F" (Figure 2) or "C" (Figure 3).
Broil
for 7seconds
Figure 1
Figure 2
[al
[nni
3.Press START:to accept the change or press ST_ to reject the change.
STARTor | Figure 3 |
20