Setting the Clock
Setting the Clock
The _ | pad is used to set the clock. The clock may be set for 12 or 24 hour time of day |
v
operation. The clock has been preset at the factory for the 12 hour operation. When the range is first plugged in, or when the power supply to the range has been interrupted, the timer in the display will flash.
Press _. The display will stop flashing,
INSTRUCTIONS | PR ESS |
To set the clock (example below for 1:30)
1. Press ("'_, "CLO" will appear in the display (Fig. 1). | (_ |
,Press (_) ____ (_ pads to set the time of day to 1:30 (Fig. 2).
Press _. The time of day will appear in the display (Fig. 3).
Changing | between | 12 or 24 hour time | of day display |
|
| |||
1. | Press | and | hold _ | for 7 seconds | until "12h" or "24h" appears |
|
| |
| in the | display. |
|
|
|
|
| |
2. | Press | _ | to switch | between the | 12 and | 24 hour time of day |
| _ |
| display. The display will show either "12h" (Fig. 4) or "24h" (Fig. |
|
| |||||
| 5). | _ |
|
|
| @ | or |
3.Press (,_TAR_to accept the change or press (STOP)to reject the
v | v |
change.
4.Reset the correct time as described in To set the Clock above. Please note that if the 24 hour time of day mode was chosen, the clock will now display time from 0:00 through 23:59 hours.
DISPLAY
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
15