Kenmore 790. 9802 manual Consumer Defined Control, Setting Oven Lockout Feature

Consumer Defined Control

Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results• These include the Oven Lockout, Temperature Display and Silent Control Operation features.

Setting Oven Lockout Feature

The _o_) pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and prevents

v

the oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights. The ovens can be locked individually•

INSTRUCTIONS	PRESS	DISPLAY
To activate the Oven Lockout feature

1Press rLow';;_

•Ov_0._ _ •

2• Press and hold _ for 3 seconds.

v

3.After 3 seconds a beep will sound, "DOOR", "LOCKED" will flash and "Lot" and "LOWER" will appear in the display (Fig. 1). Once the oven door is locked the "DOOR" and "LOCKED" indicator will stop flashing and remain in the display. Allow 15 seconds for the oven door to lock.

c©

_for Fig. 1

3 seconds

To reactivate normal oven operation:

1.Press (_.

2.Press and hold _) for 3 seconds• A beep will sound•

W

"LOWER" and "LOC" will disappear from the display. "DOOR" and "LOCKED" will flash in the display until the oven door has completely unlocked.

3.The appliance is again fully operational.

Note: Because you can set the oven lockout individually, the lower oven can be used when the upper oven lockout feature is on.

for

3 seconds

iiil...............

...........ii

Setting Silent Control Operation

The DELAY START _ and FLEX CLEAN _ pads control the Silent Control operation feature. The Silent Control

operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.

INSTRUCTIONS

To change control from normal sound operation to

silent control operation

1. Press and hold _ for 6 seconds (Fig. 2). After 6 seconds, a

beep will sound and "SP" (Speaker) will appear in the display (Fig. 3).

2.Press _ to switch between normal sound operation and silent operation mode.

If "SP" appears (Fig. 3), the control will operate with normal sounds and beeps. If "==" appears (Fig. 4), the control is in the silent operation mode.

3.Press _ARTj._to accept the change or press _o_) to reject the change•

PRESSDISPLAY

Fig. 2

for 7 seconds

Fig. 3

Fig. 4

Note: The control will always beep at the end of a kitchen timer setting and will beep when a set temperature has been reached, even if the control is set to silent operation.

17