Kenmore 790. 9802 @ @ O@@or Q@@ @ QQ@, Self-Cleaning, To Start the Self-CleanCycle, iNSTRUCTiONS

Self-Cleaning

To Start the Self-Clean Cycle

The FLEX CLEAN @ pad controls the Self-Cleaning feature. Ifyou are planning to use the oven directly after a self-clean cycle remember to allow time for the oven to cool down and the oven door to unlock. This normally takes about one hour. So a 3 hour self-clean cycle will actually take about 4 hours to complete.

*It is recommend to use a 2 hour self-clean cycle for light soils, a 3 hour cycle for average soils, and a 4 hour cycle for heavy soils (to assure satisfactory results).

To avoid possible burns use care when opening the oven door after the Self-Cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or steam to escape,

DO NOT force the oven door open. This can damage the automatic door locking system. Use caution and avoid possible burns when opening the door after the Self- Cleaning cycle has completed. The oven may still be VERY HOT.

iNSTRUCTiONS

To Start an immediate Self-Cleaning cycle or to set a Delay Start time of 4:30 and shut-off automatically (example provided is a default 3 hour Self-Clean Cycle)

1.Be sure the clock is set with the correct time of day and the oven door is closed.

2.Press @.

3. Press _. "LOWER" and "CLEAN" will flash and "3:00 HR"

will show in the display (Fig. 1). The control will automatically clean for a 3 hour period (default self-cleaning cycle time).

Note: if a 2 or 4 hour clean time is desired, press (_ @

@ for 2 hour or press @ @ @ for a 4 hour clean time. Set the cleaning time based on the amount of soil: light, medium or heavy (* See above).

4.Press STA_. The "DOOR LOCKED" icon will flash;

"LOWER", "CLEAN", I_ icon and the letters "CLn" will remain on in the display (Fig. 2).

5.As soon as the control is set, the motor driven oven door lock will begin to close automatically. Once the door has been locked the "DOOR LOCKED" indicator light will stop flashing and remain on. Also, the oven icon will appear in the display (Fig. 3).

Note: Allow about 15 seconds for the oven door to lock. The cooktop will also be lockout and will not be avalaible during the self-clean cycle.

Note: if the optional delay Self=Clean feature is desired, perform steps 6-9. If Self=Clean is started immediately skip the remaining steps and continue with "When the Self=Clean cycle is completed" on the following page.

6.Press @ (Fig. 4). Enter the desired start time using the number pads (_) _3,_ @ (Fig. 5).

7.Press _A_. "CLEAN", "DELAY", "LOCK", "LOWER" and

"DOOR"'will be displayed (Fig. 6).

9.The control will start the self-cleaning at the set start time, for the period of time previously selected. At that time, the icon "DELAY" will go out.

PRESS

@

@

O@@or

Q@@

@

QQ@

DISPLAY

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Fig. 6

32