Kenmore 790. 9802 manual Setting the Clock, Setting Continuous Bake or 12 Hour Energy Saving

Models: 790. 9802

1 40
Download 40 pages 34.53 Kb
Page 16
Image 16
Setting the Clock

Setting the Clock

Setting Continuous Bake or 12 Hour Energy Saving

The KITCHEN TIMER _ and FLEX CLEAN @ pads control the Continuous Bake or 12 Hour Energy Saving features. The oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous Baking.

INSTRUCTIONS

To set the control for Continuous Bake or 12 Hour

Energy Saving features

1. Press and hold _ for 7 seconds (Fig. 1). After 10 seconds

v

"12h" or "--h" will appear in the display and the control will beep once (Fig 2 or 3).

2.Press @ to switch between the 12 Hour Energy Saving and continuous bake features. Note: "12h" (Fig. 2) in the display indicates the control is set for the 12 Hour Energy Saving mode and "==h" indicates the control is set for the Continuous Bake feature (Fig. 3).

3. Press _

to accept the change (Fig. 4; display will return to

time of day) or press _OP')to reject the change.

PRESSDISPLAY

Fig. 1

for 10 seconds

Fig. 2

Fig. 3

or

Fig. 4

Setting Kitchen Timer

The KITCHEN TIMER ____,_pad controls the Kitchen Timer feature. The Kitchen Timer serves as an extra timer in the

kitchen that will beep when the set time has run out. It does not start or stop cooking. The Kitchen Timer feature can be used during any of the other oven control functions, except during a self-clean operation. Refer to "Minumum and Maximum Control Pad Settings" for time amount settings.

INSTRUCTIONS

To set the Kitchen Timer (example: 5 minutes)

1. Press (Fig. 5).

2.Press the number pads to set the desired time in the display

(example (_)). Press _. The time will begin to count

down in the display (Fig. 6). Note: If (_A_ is not pressed the timer will return to the time of day after 25 seconds.

3.When the set time has run out, "End" and "TIMER" will show in the display (Fig. 7). The clock will sound with 3 beeps every 7

seconds until _ is pressed.

To cancel the Kitchen Timer before the set time has

run out

PRESSDISPLAY

Fig. 6

@

Fig. 7

Press _.

The display will return to the time of day.

To Set Add 1 Minute Feature

The @ ADD 1 MINUTE pad is used to set the Add 1 Minute feature. When the @ pad is pressed, 1 minute is

added to the Minute Timer feature if this feature is already active. If the Minute Timer feature is not active and the pad is pressed, the Minute Timer feature will become active and will begin counting down from 1 minute.

16

Page 16
Image 16
Kenmore 790. 9802 manual Setting the Clock, Setting Continuous Bake or 12 Hour Energy Saving, Instructions, Pressdisplay