Timer operation
7Put the unit in standby mode.
|
|
|
|
| ÷ When the unit enters the Standby mode, the |
Press the |
| (POWER) key. | STANDBY/TIMER indicator lights in green. | ||
| |||||
| |||||
|
|
|
|
| ÷ If there is a power failure or the AC power cord is un- |
|
|
|
|
| plugged after the timer reservation has been activated, |
|
|
|
|
| the STANDBY/TIMER indicator blinks in green. In this |
|
|
|
|
| case, the clock setting should be restarted from the |
|
|
|
|
| beginning. |
Deactivating and activating the timer program
Once the timer setting procedure has been performed, the timer program can be deactivated or activated easily.
Preparations
When the unit is in on, press the TIMER key on the remote.
Each press of the TIMER key changes the items ;
1 Activate PROG.1 timer.
2 Activate PROG.2 timer.
1, 2 Activate both PROG.1 and PROG.2 timer.
Deactivate the timer. (Timer indicator is off.)
÷The timer program contents remain even if the timer is deactivated.
÷After a power failure or the AC power cord has been unplugged, the STANDBY/TIMER indicator blinks in green. In this case, set the present time, and then go through the timer setting procedure again.
section Basic
section Application
section Knowledge