10. Listen to the Digital Radio (KDC-BT73DAB)
10-1. Listening to the Digital Radio
Selecting a tuner source
Press [SRC] to select a Digital Radio (“DIGITAL RADIO”) source.
Refer to <Source selection> (page 14).
Searching an ensemble Press and hold [E] or [F].
Searching an ensemble, service, and component
Press [E] or [F].
T: Press [E]
U: Press [F]
Ens.: ensemble
Serv.: service
Compo.: component
The seek mode can be changed. Refer to <Selecting a Seek mode> (refer to below), <10- 9. Digital Radio setting> (page 50).
Selecting a Seek mode
Press [S].
Display | Operation |
“Auto1” | Press: Select an ensemble, service, and component. |
| Press and hold: Automatic search for an ensemble. |
“Auto2” | Search in order of the service in the preset memory. |
“Manual” | Press: Select an ensemble, service, and component. |
| Press and hold: Manually search for an ensemble. |
Updating Service List information
Press and hold [R].
10-2. Service preset memory
You can store a ensemble, service, and component in the memory.
1Press [E] or [F] to select the ensemble, service, and component.
2Press [1/6] twice.
Enter the Preset memory mode.
3Turn [Control] knob to select a memory number (“1” – “18”).
4Press and hold [Control] knob.
Exiting from the Preset memory mode Press and hold [1/6].
About the Mix Station preset mode
•If you press [1/6] three times in step 2, the Mix Station preset mode is selected with “Mixed Preset List” displayed. In this mode, different bands and tuner sources (FM, AM, Digital Radio etc.) can be saved in the same preset layer, which allows you to recall a desired station without switching between bands and/or tuner sources. Maximum of 6 stations can be preset in the Mix Station preset mode.
Once the Mix Station preset mode is set, you can enter the same mode by just pressing [1/6] once in step 2. Pressing [1/6] twice allows you to return to the normal Station preset mode.
10-3. Recall preset service
Recall the service in the memory.
5Press [1/6] twice.
Enter the Preset memory mode.
6Turn [Control] knob to select a memory number (“1” – “18”).
7Press [Control] knob.
10-4. Service list select
You can select the component you would like to listen to from the service list.
1Press [1/6].
The service list is displayed in the alphabetical order.
2Turn [Control] knob to select a service, and then press [Control] knob.
46 | English 47 |
