Kenwood KDC-BT73DAB DSP preset recall, You can register the values set the DSP control items

DSP settings (KDC-BT73DAB, KDC-BT53U)

5-10. DSP preset

You can register the values set the DSP control items.

1Set the DSP control items

Refer to the following operations to setup the

Sound Control.

-- “SubWoofer Level” of <5-1. Audio control> (page 18)

--<5-2. Manual equalizer control> (page 19) --<5-3. Car type selection> (page 19)

--<5-4. Speaker setting> (page 20) --<5-5. X’Over setting> (page 20)

--<5-6. Listening position setting> (page 21) --<5-7. Delay time control> (page 21)

--<5-8. Channel level fine adjustments> (page 22)

2Press [Control] knob.

Enters the Function setting mode.

3Select “Audio Control” > “Pro Setup” > “Audio Preset” > “Memory” using [Control] knob. For how to use [Control] knob, refer to <3-3. How to select the item> (page 13).

4Select a memory number (“Memory 1” or “Memory 2”) using [Control] knob.

5Select “YES” using [Control] knob. “Memory Completed” appears.

Exiting from the Function setting mode Press and hold [1/6].

When reset

•When this unit is reset, all setting values stored in “Memory 1” are applied to the source.

5-11. DSP preset recall

You can recall the DSP control items registered to the <5-10. DSP preset> (page 24).

1Press [SRC] to select a recall source. Refer to <Source selection> (page 14).

2Press [Control] knob.

Enters the Function setting mode.

3Select “Audio Control” > “Pro Setup” > “Audio Preset” > “Recall” using [Control] knob.

For how to use [Control] knob, refer to <3-3. How to select the item> (page 13).

4Select a recall memory number (“Recall 1” or “Recall 2”) using [Control] knob.

5Select “YES” using [Control] knob. “Recall Completed” appears.

Exiting from the Function setting mode Press and hold [1/6].

24 KDC-BT73DAB/ KDC-BT53U/ KDC-5057SD English 25