22 | KDC-BT73DAB/ KDC-BT53U/ KDC-5057SD English | 23
Rear Right speaker “RearR” 0 – 610 cm
Subwoofer Left “SW L” 0 – 610 cm
Subwoofer Right “SW R” 0 – 610 cm
(Colored text: Factory setting)
5 Select a value using [Control] knob.
Exiting from the Function setting mode
Press and hold [1/6].
5-8. Channel level fine adjustments
After DTA compensation, you can finely adjust
the unsatisfactory speaker volume of respective
speaker.
1 Press [SRC] to select a source other than
Standby (“STANDBY”).
Refer to <Source selection> (page 14).
2 Press [Control] knob.
Enters the Function setting mode.
3 Select “Audio Control” > “Pro Setup” > “DTA
Settings” > “Channel Level” using [Control]
knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13).
4 Select a speaker using [Control] knob.
Speaker Display Range
Front Left speaker “Front” “L” -8 – 0 dB
Front Right speaker “Front” “R” -8 – 0 dB
Rear Left speaker “Rear” “L” -8 – 0 dB
Rear Right speaker “Rear” “R” -8 – 0 dB
Subwoofer Left “SW” “L” -8 – 0 dB
Subwoofer Right “SW” “R” -8 – 0 dB
(Colored text: Factory setting)
5 Select a value using [Control] knob.
Exiting from the Function setting mode
Press and hold [1/6].
5-9. Resetting of DTA Settings
You can reset the DTA-compensated values to the
factory settings.
1 Press [SRC] to select a source other than
Standby (“STANDBY”).
Refer to <Source selection> (page 14).
2 Press [Control] knob.
Enters the Function setting mode.
3 Select “Audio Control” > “Pro Setup” > “DTA
Settings” > “Reset DTA Setting” using [Control]
knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13).
4 Select “YES” using [Control] knob.
Exiting from the Function setting mode
Press and hold [1/6].
DSP settings (KDC-BT73DAB, KDC-BT53U)