Button Adjustment Item Display Range Non-Fading | Kenwood KDC-7024

[3] button
	Adjustment Item	Display	Range
	Middle Center	"MID F"	0.5/1.0/1.5/2.0 kHz
	Frequency
	Middle level	"Middle"	–8 — +8
	Middle Q Factor	"Middle Q"	1.0/2.0
[4] button
	Adjustment Item	Display	Range
	Treble Center	"TRE F"	10.0/12.5/15.0/17.5 kHz
	Frequency
	Treble level	"Treble"	–8 — +8
[5] button
	Adjustment Item	Display	Range
	Balance	"Balance"	Left 15 — Right 15
	Fader	"Fader"	Rear 15 — Front 15

• According to the Bass Q Factor setting value, the frequencies that can be set in Bass Center Frequency change as shown below.

Bass Q Factor	Bass Center Frequency
1.00/1.25/1.50	60/70/80/100
2.00	60/70/80/150

•When the bass extend is set to ON, low frequency response is extended by 20%.

[3] button
	Adjustment Item	Display	Range
	Non-Fading	"LPF NF"	50/80/120/Through Hz
	Low Pass Filter
[4] button
	Adjustment Item	Display	Range
	Loudness	"LOUD"	ON/OFF
[5] button
	Adjustment Item	Display	Range
	Non-Fading level	"NF Level"	–15 — +15

• Loudness: Compensating for low and high tones during low volume.

•When the Dual Zone System is ON, the setting for the High Pass Filter is nullified.

3rd section
[2] button
Adjustment Item	Display	Range
Volume offset	"V-Offset"	–8 — ±0

Volume offset: Each source's volume can be set as a difference from the basic volume.

2nd section
[2] button
Adjustment Item	Display	Range
Front/Rear	"HPF"	Through/100/125/170 Hz
High Pass Filter

— 13 —

Image 13

Kenwood KDC-7024, KDC-M7024 Button Adjustment Item Display Range Non-Fading, 50/80/120/Through Hz, High Pass Filter

Contents

KDC-M7024 KDC-7024 Contents Connected to this unit Safety precautionsDo Not Load 3-in. CDs in the CD slot Cleaning the Unit Cleaning the Faceplate TerminalsCleaning the CD Slot Lens Fogging About GSM Hands Free Unit Marking of products using lasers Except for some areas Acceptable media Settings for your MP3 encoder and CD writerAcceptable medium formats Entering ID3 tag When a Folder Search is executed with file ¡$ being played When a File Search is executed with file ¡$ being playedMP3 playing order Whats the Multi-function Key System? Setting each functionDisplaying the desired function Real operational example of the Multi-function Key System About CDs Power General featuresTurning on the Power Turing OFF the Power Increasing Volume VolumeDecreasing Volume Attenuator 1st section Audio Control2nd section 3rd section 2nd section Button Adjustment Item Display Range Front/Rear Button Adjustment Item Display Range Non-Fading50/80/120/Through Hz High Pass Filter Text Display Switching Speaker SettingDisplay Mode Switching CD & External disc source Tuner sourceMP3 source Auxiliary input source Auxiliary Input Display Setting External Display SwitchingPanel Position Setting Non-fading Output Theft Deterrent Panel Exit Panel Position Setting mode Press the RTN buttonRemoving the Backpanel Reattaching the Backpanel Dual Zone System In External disc or Auxiliary input source Hiding the Control PanelTEL Mute CA-C1AX Tuning Tuner featuresStation Preset Memory Auto Memory Entry Preset TuningCalling up the stations in the memory Call up the station Traffic Information RDS featuresRadio Text Scroll Receiving other traffic information stations PTY Program Type Presetting the Program Type Program Type presetCalling up the preset Program Type Changing Language for PTY Function CD/MP3/External disc control features Playing External Disc Playing CD & MP3Fast Forwarding and Reversing Track/File/Disc/Folder Repeat Track/File SearchTurn ON/OFF the Repeat Play Press the 4 REP button Repeat play Display Magazine Random Play Function of disc changer Scan PlayRandom Play Folder Select Function of MP3 Disc Naming Dnps Canceling the Folder Select modeScrolling the folder name display Text/Title Scroll Receiving a call GSM Hands Free Unit control featuresPress the 1, 3 6 or Next button Information Name Telephone Number Hang up Switching between the Name and Telephone Number Canceling the Hands Free modePhone Book Search Direct Dial Function of the KCA-RC420 Synchronize the data Phone Book/ Message SMS data synchronize Menu system Security Code Standby modeMenu System Display Setting Enter Security Code modeSelect the digits to enter Press the 4 or ¢ button Confirm the Security Code Auto Response time Adjust When hands free unit connecting Manual Clock AdjustmentTouch Sensor Tone DSI Disabled System Indicator Contrast AdjustmentSynchronize Clock Selectable Illumination System Q Setting OFF Wait Time SettingEject angle setting Standby mode Switching preout Standby mode News Bulletin with Timeout Setting Local SeekIn Tuner modeS. Bass Management System S. Frequency Offset Auto Memory Entry Tuner mode Tuning Mode Tuner modeRestricting RDS Region Region Restrict Function AF Alternative Frequency Text Scroll Power OFF Timer Installation Procedure AccessoriesExternal view Cable Colour Functions Connecting Wires to TerminalsConnection Ignition wire Red Battery wire Yellow Connecting Wires to Terminals Installtion Removing the hard rubber frame Removing the Unit Removing the Unit Locking the Backpanel to the unitReattach the Backpanel ? The power does not turn ON.01 Troubleshooting Guide Tuner source MP3 source Messages shown below display your systems condition Specifications