Kenwood KDC-7024, KDC-M7024 instruction manual 6Select the source Press the SRC button

Dual Zone System Rear: The sound of the source selected with step 1 is outputted from rear, and the sound of the source selected with step 6 is outputted from front.

Dual Zone System Front: The sound of the source selected with step 1 is outputted from front, and the sound of the source selected with step 6 is outputted from rear.

5Exit the Dual Zone System Control mode Press the [RTN] button.

6Select the source Press the [SRC] button.

Select the source sound to be output from the internal source channel.

• The Dual Zone System can be used with the sources shown below.

-KCA-S210A

-CA-C1AX

-External disc changer/ player

•While Dual Zone System is ON, the setting of Dual Zone System Front or Rear is disabled.

Set Dual Zone System Front or Rear first, and then set the Dual Zone System to ON.

•When the Dual Zone System is ON, there is no Dual zone channel audio control or other effect.

•When you use the Dual Zone System by selecting the optional accessory source for the output of the Dual zone channel, you cannot select another optional accessory source as the source for the Internal source channel.

•When you set the Dual zone system to ON while the non-fading preout is switched ON, the sound of the non-fading preout isn’t output.

•The Dual Zone System cannot be used if a GSM hands free unit or a DAB control unit is connected.

•When the Dual Zone System is ON, the setting for the High Pass Filter is nullified.

— 19 —