Kenwood KDC-M7024 OFF Wait Time Setting, System Q Setting, Eject angle setting, Switching preout

Menu system

English

OFF Wait Time Setting

Setting the time until the faceplate hide operation starts after the power is turned OFF.

The faceplate can be removed only during the set time period.

Display and Setting

"Off Wait 0s"

…

"Off Wait 3s" (Original setting)

…

"Off Wait 25s"

System Q Setting

Setting display/don't display for the System Q factors (Bass center frequency, Bass Q factor, Bass extend, Middle center frequency, Middle Q factor, and Treble center frequency) in Audio control.

Display	Setting
"System Q ON"	The System Q factors are displayed.
"System Q OFF"	The System Q factors aren't displayed.

Eject angle setting <In Standby mode>

This function sets the opening and closing operation of a panel when a disc is inserted and when it is ejected.

Display	Setting
"Ejct Ang Slp"	Opens and closes the panel while
	maintaining the angle of the control panel
	to the set angle.
"Ejct Ang Lvl"	Opens and closes the panel after setting
	the angle of the control panel to the
	horizontal position.

Switching preout <In Standby mode>

Switching the preout between the rear and non-fading. (In non- fading it outputs without effect from the fader control.)

Display	Setting
"SWPRE Rear"	Rear preout.
"SWPRE N-Fad"	Non-fading preout.

Built-in Amp Mute Setting <In Standby mode>

Toggles ON or OFF the mute control on the built-in amplifier. Turning ON this control enhances the preout quality.

Display	Setting
"AMP Mute OFF"	The built-in amplifier activates.
"AMP Mute ON"	The built-in amplifier deactivates.

— 38 —