2Enter Panel Position Setting mode Press the [4] ("PNL") button.
3Select the item for adjustment Press the desired [2] — [5] button.
Each time the button is pressed the items that can be adjusted switch as shown below.
Adjustment Item | Button | Display |
The panel tilts upwards | [2] | |
The panel tilts downwards | [3] | "ANG+" |
The panel slides backward | [4] | |
The panel slides forward | [5] | "SLD+" |
4Exit Panel Position Setting mode Press the [RTN] button.
The control panel may be interfered with the shift lever or another part depending on the angles of the control panel.
Set the angle to avoid any interference.
No sound is produced while the panel is operating.
Theft Deterrent Panel
The Backpanel of the unit can be detached and taken with you,
helping to deter theft.
Removing the Backpanel
1Turn the ignition OFF or press the [SRC] button for at least 1 second.
Turn OFF the power, and the control panel becomes horizontal.
After the set time passes in <OFF Wait Time Setting> (page 38), the panel is closed.
2Remove the Backpanel forward.
When <DSI (Disabled System Indicator)> (page 37) is set to ON, DSI blinks.
• The back panel is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the back panel in its special storage case while detached.
•Do not expose the Backpanel or its storage case to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.
Reattaching the Backpanel
1Set the Backpanel to the panel bracket.
2Hold down on the Backpanel until it is locked.
— 17 —
