Recording on MDs

Synchro-Recording With AudioEquipment of Your Choice(Music Synchro-Recording) Z

By using the MUSIC SYNC button, you can automatically start recording in sync with the signal input from the program source.

The method of marking track numbers differs, depending on the program source being recorded and the setting of the Setup Menu 02 (see “Notes on Recording” on page 13).

Z21 – 22 23 . 24 , 25

REPEAT A˜B A.SPACE M.SCAN

/>25 ? ! ( )

 

WRITE

CLEAR P.HOLD

NAME

CHAR

NUM

·P p

REC-IT

=+ r

 

CD-SYNC

T.REC MUSIC SYNC

MUSIC SYNC

0

)

 

STOP

START

STANDBY

 

 

CD PLAYER

FADER

 

P= +

DIGITAL REC LEVEL /ANALOG OUT LEVEL

1Do Steps 1 to 8 in “Recording on an MD” on pages 9 and 10.

2Press MUSIC SYNC.

The deck changes to recording pause.

3Start playing the program source you want to record.

The deck starts recording automatically.

To stop Music Synchro-Recording

Pressp .

Note

When Music Synchro-Recording, the Smart Space Function and the Auto Cut Function turn on automatically regardless of their setting (On or Off) and type of input (digital or analog).

Synchro-Recording With a Sony CD Player Z

By connecting your deck to a Sony CD player or Hi-Fi Component System, you can easily dub CDs onto MDs using the CD synchro buttons on the remote. If your deck is connected to a Sony CD player by a digital input cable, track numbers are automatically marked as appear on the original even when “T.Mark Off” is selected in Setup Menu 02. If your deck is connected to a Sony CD player by audio connecting cords through the LINE(ANALOG) IN jacks, track numbers are automatically marked when you set Setup Menu 02 to “T.Mark LSyn” (see page 17).

As the same remote controls both the CD player and the deck, you may have trouble operating both units if they are far from each other. If you do, place the CD player close to this deck.

Z21 – 22 23 . 24 , 25

REPEAT A˜B A.SPACE M.SCAN

/>25 ? ! ( )

 

WRITE

CLEAR P.HOLD

NAME

CHAR

NUM

·P p

 

 

 

REC-IT

 

START

=

+

r

STANDBY

0

)

T.REC MUSIC SYNC

STOP

 

CD-SYNC

 

 

STOP

START STANDBY

 

 

CD PLAYER

FADER

 

CD PLAYER P

P

= +

 

 

 

 

DIGITAL REC LEVEL

 

 

 

 

/ANALOG OUT LEVEL

 

1Set the source selector on the amplifier to CD.

2Do Steps 2 to 8 in “Recording on an MD” on pages 9 and 10 to prepare the deck for recording.

3Insert a CD into the CD player.

4Select the playback mode (Shuffle Play, Program Play, etc.) on the CD player.

5Press STANDBY.

The CD player pauses for playing and the deck pauses for recording.

(Continued)

19EN