To stop recording
CD-SYNC
STOP START STANDBY
CD PLAYERFADER
DIGITAL REC LEVEL /ANALOG OUT LEVEL
T.REC MUSIC SYNC
REC-IT
WRITE
NAME CHAR NUM
CLEAR P.HOLD
Recording on MDs
Recording the Current CD Track (REC-IT Function) Z
This function lets you record a track on an MD while listening to a CD.
This function operates only when you connect a Sony CD player with a CONTROL A1 jack to the MD deck using a control A1 cable. For details of CONTROL A1 connections, see page 6.
REPEAT A˜B A.SPACE M.SCAN

Notes

• The titles of the extremely short CD tracks may not be copied to the MD.

• Text information may not be copied for some CDs.

While “TOC Writing” is flashing

Do not move the deck or pull out the AC power cord to ensure the complete recording. The deck is currently updating the MD Table of Contents (TOC).

/>25 ? ! ( )

·P p

=+ r REC-IT

0)

P= +

1Set the source selector on the amplifier to CD.

2Do Steps 2 to 8 in “Recording on an MD” on pages 9 and 10 to prepare the deck for recording.

3Press ·on the CD player.

4Press REC-IT when you hear a track you want to record.

Play returns to the start of the track and recording starts. The MD deck stops at the end of the track, but CD playback continues from the next track.

Pressp onthedeck.

zThe deck copies CD text information as it is to the

MD

When the current CD has CD text, the track titles are copied as the MD track titles.

zWhen “No Connect” appears in the display

Check the control A1 cable connection and make sure the CD player mode selector is set to CD1.

22EN