Kenwood MDS-JA20ES 42EN, Erasing all tracks on an MD, To cancel the Erase Function, To cancel the Erase Function

Editing Recorded MDs

4Turn AMS to select the track to be erased.

5Press AMS or YES.

When the track selected in Step 4 has been erased, “Complete!!” appears for a few seconds and the total number of tracks in the music calendar decreases by one.

The track following the erased track begins playing. (If you erase the last track, the track preceding the erased track starts playing.)

6Repeat Steps 1 to 5 to erase more tracks.

To cancel the Erase Function

Press MENU/NO or p.

Note

If “Erase ???” appears in the display, the track was recorded or edited on another MD deck and is record-protected. If this indication appears, press AMS or YES to erase the track.

Erasing all tracks on an MD

Erasing a recordable MD deletes the disc name, all recorded tracks, and titles.

1While the deck is stopped, playing, or pausing, press MENU/NO to display “Edit Menu”.

2Turn AMS until “All Erase ?” appears in the display.

3Press AMS or YES.

“All Erase??” appears in the display and all tracks in the music calendar start flashing.

4Press AMS or YES.

When the disc name, all recorded tracks, and titles on the MD have been erased, “Complete!!” appears for a few seconds and the music calendar disappears.

To cancel the Erase Function

Press MENU/NO or pto turn off the “All Erase ?” or “All Erase??” indication.

zYou can undo the Erase Function

Use the Undo Function immediately after you erased the track (see page 51).

42EN