Playing MDs
By connecting a timer (not supplied) to the deck, you can start and stop playback operations at specified times. For further information on connecting the timer or setting the starting and ending times, refer to the instructions that came with the timer.
0 ) g
§ ( P 
p 
r
TIMER PLAY MODE | ( |
1Do Steps 1 to 3 in “Playing an MD” on page 12.
2Press PLAY MODE repeatedly (or one of the PLAY MODE buttons once) to select the play mode you want.
To play only specific tracks, create a program (see page 29).
3• If you want to specify the time for the start of playback, go to Step 4.
•If you want to specify the time for the end of playback, press (to start playback, then go to
Step 4.
•If you want to specify the time for both start and end of playback, go to Step 4.
4Set TIMER on the deck to PLAY.
5Set the timer as required.
•When you have set the time for the start of playback, the deck turns off. When the specified time arrives, the deck turns on and starts playing.
•When you have set the time for the end of playback, playback continues. When the specified time arrives, the deck stops playing and turns off.
•When you have set the time for both the start and end of playback, the deck turns off. When the starting time arrives, the deck turns on and starts playing. When the ending time arrives, the deck stops playing and turns off.
6After you have finished using the timer, set TIMER on the deck to OFF.
Note
You can select Program Play in Step 2. Note, however, that programs eventually fade away when the standby status is off, and therefore if you set the time too far in the future, the program may be gone when the specified time arrives. If this has occurred, the deck enters normal play mode at the specified time and the tracks play in consecutive order.