Kenwood MDS-JA20ES 25EN, Changing the display, Displaying the recording date Z

Playing MDs

zThe track name and disc name are displayed as follows:

The disc name appears whenever the deck is stopped, and the name of the current track appears when the track is playing. If no title is recorded, “No Name” appears instead of a title.

To label a recordable disc and its tracks, see “Labeling Recordings” on page 47.

zYou can scroll a title of more than 12 characters

Press SCROLL/CLOCK SET (or SCROLL).

Since the display shows up to 11 characters at a time, press SCROLL/CLOCK SET again to see the rest of the title if the title has 12 characters or more.

Press SCROLL/CLOCK SET again to pause scrolling, and again to continue scrolling.

Displaying the recording date Z

When the internal clock has been set, the deck automatically records the recording date and time of all recordings. You can then check the recording date and time of a track.

1Locate the track for which you want to check the recording date and time.

When the deck is	Press
stopped	= or +

playing or on play pause =, +, or number buttons

2Press DATE RECORDED.

“No Date” appears if the internal clock has not been set or the track was recorded on another MD deck without a date and time stamp function.

Changing the display

Each time you press DISPLAY/CHAR (or DISPLAY) while the deck is stopped or playing, you can change the display as follows:

Normal display

Press

The contents of a program (only when “PROGRAM” lights up)

Press

Title (Disc name and track name)

Press

Output level (The recording level is displayed while the deck is stopped.)

Press

Pitch display

Press

DF (digital filter) display

Press

25EN