Kenwood MDS-JA20ES 21EN, Fade-inrecording, Fade-outrecording

Recording on MDs

Fading In and Out (Fader)

You can gradually increase the recording level at the beginning of a recording (fade-in recording) or gradually decrease the recording level at the end of a recording (fade-out recording).

This function is convenient when, for example, you don’t want the track cut off abruptly when the disc reaches to its end.

U	16	V	17 W 18		X	19	Y	20
Z	21	–	22	23	.	24	,	25
	>25		REPEAT	A˜B	A.SPACE			M.SCAN
/		?		!	(		)
			WRITE			CLEAR		P.HOLD
	NAME		CHAR	NUM
		·			P			p
g							REC-IT
	=		+		r
					T.REC MUSIC SYNC
	0		)
		CD-SYNC
	STOP		START	STANDBY
		CD PLAYER				FADER

P = +

DIGITAL REC LEVEL

/ANALOG OUT LEVELFADER

FADER

Fade-in recording

During recording pause, press FADER at the position where you want to start fade-in recording.

Zin “Fade Z3.2s” flashes and the deck performs the fade-in recording until the counter reaches “0.0s”.

Fade-out recording

During recording, press FADER at the position where you want to start fade-out recording.

zin “Fade z3.2s” flashes and the deck performs the fade-out recording until the counter reaches “0.0s”. The deck changes to recording pause when fade-out recording finishes.

zYou can set the duration of fade-in and fade-out recording independently

1While the deck is stopped, press MENU/NO twice to display “Setup Menu”.

2To set the duration of fade-in recording:

Turn AMS to select “Setup 08”, then press AMS.

To set the duration of fade-out recording:

Turn AMS to select “Setup 09”, then press AMS.

3Turn AMS to set the duration.

Both the fade-in and fade-out recording durations can be set in 0.1 second steps.

4After selecting the duration, press AMS.

5Press MENU/NO.

21EN