Editing Recorded MDs

Notes on Editing

You can edit the recorded tracks after recording, using the following functions:

•Erase Function allows you to erase recorded tracks simply by specifying the corresponding track number.

•A-B Erase Function allows you to specify a portion within a track to erase it.

•Divide Function allows you to divide tracks at specified points so that you can quickly locate those points afterwards, using the AMS function.

•Combine Function allows you to combine two tracks into one.

•Move Function allows you to change the order of tracks by moving a specific track to a track position you want.

•Title Function allows you to create titles for your recorded MDs and tracks.

•Undo Function allows you to cancel the last edit.

If “Protected” alternates with “C11” in the display

The deck could not edit because the record-protect slot on the MD is open. Edit after closing the slot.

When “TOC” and “TOC Writing” flash in the display

Do not move the deck or pull out the AC power cord. After editing, “TOC” lights continuously until you eject the MD or turn off the deck. “TOC” and “TOC Writing” flash while the deck is updating the TOC. When the deck finishes updating the TOC, “TOC” goes off.

Erasing Recordings (Erase Function)

Do the procedures below to erase following:

•A single track

•All tracks

￿AMS ± MENU/NO

YES

0 )

 

g

 

§ ( P

p r

Erasing a single track

You can erase a track simply by specifying the respective track number. When you erase a track, the total number of tracks on the MD decreases by one and all tracks following the erased one are renumbered. Since erasing merely updates the TOC, there is no need to record over material.

zTo avoid confusion when erasing multiple tracks, you should proceed in order of high to low track number to prevent the renumbering of tracks that have not been erased yet.

Example: Erasing B

 

 

 

 

 

 

Track

1

2

3

 

4

number

 

A

B

 

C

 

D

 

 

 

Erasing

 

 

 

 

 

 

 

 

 

B is erased

 

 

 

 

 

 

 

 

1

2

 

 

 

3

 

 

A

 

C

 

 

D

 

 

 

 

 

 

 

 

1While the deck is stopped, playing, or pausing, press MENU/NO to display “Edit Menu”.

2Turn AMS until “Tr Erase ?” appears in the display.

3Press AMS or YES.

The display for erasing tracks appears and playback of the displayed track starts.

(Continued)

41EN