PREPARATION

Battery Pack Precautions

Do not use battery packs or battery chargers not recommended by Kenwood.

Do not recharge the battery pack if it is already fully charged. Doing so may cause the life of the battery pack to shorten or the battery pack may be damaged.

After charging the battery pack, disconnect it from the charger. If the charger power is reset (turned ON after being turned OFF), recharging will start again and the battery pack will become overcharged.

Do not use the transceiver while charging the battery pack. We recommend you switch the transceiver power OFF while charging is taking place.

Do not charge the battery pack when the battery pack or transceiver is wet, to avoid the risk of fire or damage. Wipe the water from the battery pack or transceiver using a dry cloth before charging.

Do not short the battery terminals or dispose of the battery by fire.

Never attempt to remove the casing from the battery pack.

Charging the Battery Pack

For charging procedures, refer to the battery charger Instruction Manual.