Kenwood TK-5410 Note:, Installing the Cap over the Universal Connector, Installing the (Optional) Speaker/ Microphone or Headset

Installing the Cap over the Universal Connector

1If you are not using an optional speaker/ microphone or headset, install the cap over the universal connector.

2Secure the cap in place using the dressing screw.

Universal

connector cap

Dressing screw

Installing the (Optional) Speaker/ Microphone or Headset

1 Insert the guide of the speaker/ microphone or

headset connector into the groove of the universal connector.

2 Secure the connector in place using the attached screw.

Note: When not using an optional speaker/ microphone or headset, install the cap over the universal connector.

Optional Speaker/ Microphone