1 Match the guides of the battery pack with the corresponding grooves on the upper rear of the transceiver, then firmly press the battery pack to lock it in place.
2 Lock the safety catch to prevent accidentally pressing the release latch and removing the battery pack.
3To remove the battery pack, lift the safety catch, press the
release latch, then pull the battery pack away from the transceiver.
Note:
◆To lift the battery pack safety catch, use a piece of hardened plastic or metal, such as a screwdriver, that is no more than
6 mm wide and 1 mm thick. It is imperative that you place the implement under only the lip of the safety catch so that you do not damage the release latch.
◆Before charging a battery pack that is attached to the transceiver, ensure that the safety catch is firmly closed.