ADVANCED OPERATIONS

Your transceiver operations vary according to the functions that your dealer has programmed onto the transceiver keys. Following is brief overview of the programmable functions. Refer to those functions which have been programmed onto your transceiver.

•2-tone (2TN) <TK-5210/ TK-5310 only>

Press this key to display the list of 2-tone codes that has been pre-stored in your transceiver memory. While viewing the 2-tone list, press the Side 2 and Side 3 keys to select your desired code, then press the PTT switch to make the call.

•Autodial (AD)

Refer to “Autodial” on page 33.

•AUX (AUX)

Press this key to toggle the auxiliary port ON and OFF. When toggled on, the optional feature connected to the auxiliary port will be activated, and on K2/K3/K5/K6/K7

model transceivers, the icon will appear on the display.

•Battery Status (BAT) <TK-5210/ TK-5310 only> Press this key to view the battery power status. Battery status is represented by the number of times the LED indicator flashes red. Five flashes represents high power, 4 represents medium power, 3 represents low power, and 2 represents very low power. If the LED flashes red only 1 time, recharge or replace your battery pack immediately. When the Low Battery Warning function is active {page 52} and the battery power is low, this key will not operate.

•Call Response (RES)

Press this key to respond to a private call. When an Individual Call is received, the Alert tone stops.

•Channel Down (CH▼)

Press this key to decrease the channel number {page 19}.

44