4Press the D> key to toggle the selected channel between Priority and Normal.

•“P1”, “P2”, or “PP” appears on the display when Priority mode is selected.

5Press the A key again to set the new channel setting.

6Press the Side 1 key to exit scan programming.

■Conventional Operation (Single Zone/ Multi-Zone)

If Scan Type has been programmed for Conventional Single Zone or Conventional Multi-Zone operation, you are able to reprogram the Priority mode.

1Press the key programmed as Scan Program.

•The icon appears on the display and blinks.

2Press the Side 2 and Side 3 keys to select the channel you will set as the Priority channel.

3Press the <C and D> keys to select your desired zone.

4Press the D> key to toggle the selected channel between Priority and Normal.

•“P1”, “P2”, or “PP” appears on the display when Priority mode is selected.

5Press the A key again to set the new channel setting and exit scan programming.

•To exit without saving, press the Side 1 key.

27