1Press the key programmed as Scrambler/ Encryption Code (K2/K3/K5/K6/K7 models only) or press and hold the key programmed as Scrambler/ Encryption for 1 second, to enter Key Selection Mode.
2Select the new Encryption key using the Side 2 and Side 3 keys or the <C and D> keys.
•There are 16 available Encryption keys (1 ~ 16).
•When a call is received, the transceiver will descramble the call as long as the received code is in the encryption list.
3Press the Side 1 key to set the new Encryption key.
Note: To return the transceiver to the default Encryption key programmed, select “PRESET”. However, if you delete the Encryption key (see below), it will not be recovered.
Deleting the Encryption Key (K2/K3/K5/K6/K7 models only)
1Press the key programmed as Key Delete to enter Key Delete mode.
2Select the current Encryption key using the Side 2 and Side 3 keys or the <C and D> keys.
3Press the B key to delete the Encryption key.
4Press the Side 1 key to exit Key Delete mode.
Note: To delete all Encryption keys (when more than one key has been set up), select “ALL”.
Password Protection (K2/K3/K5/K6/K7 models only)If the transceiver is password protected, entering an incorrect password successively 15 times will automatically delete all the Encryption keys.
•Turning the transceiver power OFF and the ON again will not reset the number of attempts for entering an incorrect password.
38