SCRAMBLER (FM) <TK-5210/ TK-5310 only>/

ENCRYPTION (P25)

Note:

◆The Scrambler function can be used only in Conventional FM Operation. Additionally, the Voice Scrambler board must be installed before this function can be activated.

◆Ask your dealer for details concerning the Voice Scrambler board and the Encryption DES/AES settings.

Secure (Encrypted) Transmission

Press the key programmed as Scrambler/ Encryption to switch the transceiver to secure (encrypted) transmission.

•On K2/K3/K5/K6/K7 model transceivers, the icon appears when the Scrambler or Encryption function is turned ON.

•Pressing the PTT switch after the Scrambler or Encryption function has been turned ON encrypts the transmitted signal.

•Each group member must activate their respective Scrambler/ Encryption functions to descramble the received signals.

Selecting the Scrambler Code

1Press the key programmed as Scrambler/ Encryption Code (K2/K3/K5/K6/K7 models only) or press and hold the key programmed as Scrambler/ Encryption for 1 second, to enter Code Selection Mode.

2Press the Side 2 and Side 3 keys or the D> and <C keys to increase or decrease the Scrambler code.

•There are 16 available Scrambler codes (1 ~ 16).

•Each group member must use the same code in order for the transceivers to descramble the received signals.

3Press the Side 1 key to set the new Scrambler code.

37