A Priority channel must be programmed in order for Priority Scan to function.
When using a single Priority channel, the transceiver will automatically change to the Priority channel when a call is received on it, even if a call is being received on a normal channel.
When using dual Priority channels, Priority channel 1 is given precedence over Priority channel 2. So, if a call is received on Priority channel 1 while a call is already on Priority
channel 2, the transceiver will automatically change to Priority channel 1.
•On K2/K3/K5/K6/K7 model transceivers, “P1” appears on the display when the channel is Priority channel 1, “P2” appears when the channel is Priority channel 2, and “PP” appears when the channel is both Priority channel 1 and Priority channel 2.
Scan RevertThe Scan Revert channel is the channel selected when you press the PTT switch to transmit during scan. Your dealer can program one of the following Scan Revert channels:
•Selected: The last channel selected is assigned as the new revert channel.
•Selected + Talkback: If the channel has been changed, the newly selected channel is assigned as the new revert channel. The transceiver “talks back” on the current channel.
•Priority 1/ Priority 2: If your dealer has programmed a Priority channel (either Priority 1 or Priority 2), this channel is the revert zone and channel.
•Priority 1 + Talkback/ Priority2 + Talkback: If your dealer has programmed a Priority channel (either Priority 1 or Priority 2), this channel is the revert zone and channel. The transceiver “talks back” on the current receive channel.
•Last Called: The last channel on which you made a call is assigned as the new revert channel.
25