Scan Programming (K2/K3/K5/K6/K7 models only)
Note: Scan programming is only available when using Conventional operation.
■Conventional Operation
If Scan Type has been programmed for Conventional operation, you are able to reprogram your scan list.
1Press the key programmed as Scan Program.
•The 
icon appears on the display and blinks.
2Press the Side 2 and Side 3 keys to select the zone or channel you will add to or remove from the scan list.
•The 
icon appears on the display for zones/ channels that are added to the scan list.
•Press the A key to toggle between Zone Select and Channel Select.
3Press the <C key to add the selected zone or channel to the scan list or the B key to remove the selected zone or channel from the scan list.
•The 
icon appears on the display when a zone/ channel is added to the scan list, and disappears when a zone/ channel is removed from the scan list.
4Press the Side 1 key to exit scan programming.
If the Priority channel has been set as Operator Selectable by your dealer, you are also able to reprogram the Priority mode.
1Press the key programmed as Scan Program.
• The 
icon appears on the display and blinks.
2Press and hold the A key for 2 seconds to edit the Priority channel.
3Press the Side 2 and Side 3 keys to select the channel you will set as the Priority channel.
26