Manuals / Brands / Marine Equipment / Marine Radio / Kenwood / Marine Equipment / Marine Radio

Kenwood TK-5410 ■Reviewing Messages in the Stack Memory, PTT, eport, Status, Selcall, Long Messages, Short Messages, Selcall + Status

1 66

Download 66 pages, 669.34 Kb

■Reviewing Messages in the Stack Memory

1Press and hold the key programmed as Selcall, Status, or Selcall + Status for 1 second to enter Stack mode.

•The last received message is displayed with the message number.

2Press the Side 2 and Side 3 keys to select the desired message.

3Press the Side 1 key to return to normal operation.

•To delete the selected message, press the B or # key. To confirm the deletion, press the B or # key again.

•To delete all messages, press and hold the B or # key for 1 second. To confirm the deletion, press the B or # key again.

Short Messages

To send a short message, you must connect the transceiver to a PC. Ask your dealer for details.

•Short messages can contain a maximum of 48 characters.

•On K2/K3/K5/K6/K7 model transceivers, received short messages are displayed the same as Status messages and are stored in the same stack memory. A combined maximum of 15 Status calls and short messages can be stored in the stack memory.

Long Messages

To send and receive long messages, you must connect the transceiver to a PC. Ask your dealer for details.

•Long messages can contain a maximum of 4096 characters.

GPS Report

To send your location data, you must first connect a GPS microphone to the transceiver. GPS data can be transmitted using 1 of 5 methods: auto transmission, upon request, manual transmission, upon pressing/releasing the PTT switch, and during emergency mode. Ask your dealer for details.

31

Contents

Page Terminal Descriptions Thank You Models Covered by this Manual TK-5210 TK-5310 TK-5410 Page One or more of the following statements may be applicable: FCC WARNING INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC Page Precautions Turn the transceiver power off in the following locations: Page Page Note: Supplied Accessories ■Charging the Battery Pack Information concerning the battery pack: •Do not disassemble or reconstruct battery •Do not short-circuitthe battery •Do not incinerate or apply heat to the battery •Avoid immersing the battery in water or getting it wet by other means Page •Do not reverse-chargeor reverse-connectthe battery •Do not touch a ruptured and leaking battery •Do not charge the battery for longer than the specified time •Do not place the battery pack into a microwave or high pressure container •Keep ruptured and leaking battery packs away from fire ■Using the Li-ionBattery Pack ■Characteristics of the Li-ionBattery Pack Installing/ Removing the (Optional) Battery Pack Installing the (Optional) Antenna Installing the Belt Clip Installing the Cap over the Universal Connector Installing the (Optional) Speaker/ Microphone or Headset Page qPower switch/ Volume control wSelector knob eConcentric switch rTransmit/ Receive/ Battery low indicator tLever switch !0PTT (Push-To-Talk)switch !1Side 2 key !2Side 3 key !3Display (K2/K3/K5/K6/K7 models only) Refer to the display on page !4A key (K2/K3/K5/K6/K7 models only) isplay models only IndicatorDescription Page Programmable Function P25 Con FM Con P25 Trunk Page ■Transceiver Password Adjusting the Volume Selecting a Zone and Channel Zone Up Zone Down Channel Up Transmitting Channel Up Channel Down Monitor Squelch Off ■Making Group Calls (P25) ■Making Individual Calls (P25) (K2/K3/K5/K6/K7 models only) Individual Receiving Zone Up Zone Down ■Receiving Group Calls (P25) ■Receiving Individual Calls (P25) Scan Temporary Channel Lockout Scan Delete Priority Scan Scan Revert Selected: Selected + Talkback: Priority 1/ Priority 2: ■Conventional Operation ■Conventional Operation (Single Zone/ Multi-Zone) FleetSync: ALPHANUMERIC 2-WAYPAGING FUNCTION ■Transmitting (K2/K3/K5/K6/K7 models only) ■Receiving ■Identification Codes ■Transmitting ■Reviewing Messages in the Stack Memory ■Manual Dialing (K3/K6 models only) ■Keypad Auto PTT (K3/K6 models only) ■Store & Send (K2/K3/K5/K6/K7 models only) Autodial (K2/K3/K5/K6/K7 models only) Autodial tun ode ■Manual Dialing (K2/K3/K5/K6/K7 models only) ■Selecting a Number from the List (K2/K3/K5/K6/K7 models only) Receiving a Telephone Call Making a Status Call Emergency Secure (Encrypted) Transmission Scrambler Encryption Selecting the Scrambler Code Scrambler/ Encryption Code Selecting the Encryption Key (K2/K3/K5/K6/K7 Key Delete Password Protection (K2/K3/K5/K6/K7 models only) Quiet Talk (QT)/ Digital Quiet Talk (DQT) ■Operator Selectable Tone (OST) (K2/K3/K5/K6/K7 models only) Operator Selectable Tone Operator Selectable Tone ■2-toneSignaling ■DTMF Signaling ■FleetSync Signaling ■MDC-1200Signaling VOX Gain Level VOX VOX Operation Clock Clock Adjustment Auxiliary (orange) Page •Channel Recall (RCL) •Channel Select •Channel Up (CH▲) •Clock (CLK) •Direct Channel 1 ~ 5 (DC1 ~ DC5) •Home Channel (HOM) Home Channel •Individual (IDV) •Keyset (KST) •Key Delete (KDL) •Monitor (MON) •Monitor Momentary (MON) •None •Operator Selectable Tone (OST) •OST Down (OS▼) Page Page •Tone (TON) •Vibrator (VIB) <TK-5210/ TK-5310only •VOX (VOX) •Zeroize (ZER) •Zone Down (ZN▼) Time-out Timer (TOT) Battery Saver Low Battery Warning Signal Strength Indicator (K2/K3/K5/K6/K7 models only) Compander Busy Channel Lockout (BCL) Out of Range Site Trunking Control Channel Hunt Voice Annunciation nAuto Recording nVoice Memos nPlayback