Kenwood VC-H1 Auto Transmit, AF Muting, Display Contrast Change, Press TX+RX+ Power on

AUTO TRANSMIT

The VC-H1 is capable of automatically capturing and transmitting images every 3 minutes. Press [S]+[TX]+

POWER ON to switch Auto Transmit ON or OFF (default).

•Keep pressing [S] and [TX] for longer than 2 seconds.

•“A/TX-ON” or “A/TX-OFF” appears to indicate the new status.

•If you have entered a call sign, it will be superimposed onto an image to be transmitted.

•To interrupt transmission, press [RX].

Note:

◆When in Auto Transmit mode, the VC-H1 does not receive images.

◆When in Auto Transmit mode, you cannot perform key operations other than [S]+[TX]+ POWER ON and [RX].

AF MUTING

You can specify whether the VC-H1 will mute only image signals or both audio and image signals. Press [RX]+ POWER ON to switch AF ON (default) or OFF.

•AF ON: Only image signals are muted.

•AF OFF: Both audio and image signals are muted.

•“AF-ON” or “AF-OFF” appears to indicate the new status.

DISPLAY CONTRAST CHANGE

You may sometimes need to adjust the display contrast on the monitor, depending on the ambient conditions.

1Press [TX]+[RX]+ POWER ON.

• “CONTRAST” appears.

2Press [TX] or [RX] to change the contrast.

3Press [MR] to complete the adjustment.

13