TROUBLESHOOTING
The problems described in this table are commonly encountered operational malfunctions and are usually not caused by circuit failure.
Problem |
| Probable Cause |
| Corrective Action | Page Ref. |
The | 1 | The batteries have not been | 1 | Load the batteries so that their | 3 |
switched ON. |
| correctly loaded. |
| polarities match those marked on |
|
| 2 |
| 2 | the |
|
| The batteries became dead. | Replace the batteries. | 3 | ||
| 3 | An AC adapter other than the | 3 | Use the AC adapter that came | 4 |
|
| provided one has been used. |
| with the |
|
| 4 | Shorting the video input terminal | 4 | Contact your KENWOOD dealer, | — |
|
| power line with an external element |
| customer service, or service |
|
|
| caused the internal fuse to blow. |
| station. |
|
|
|
|
| ||
The power to the camera and | The Battery Saver is ON. | If necessary, switch OFF the | 11 | ||
monitor units are |
|
| Battery Saver. |
| |
automatically turned OFF. |
|
|
|
|
|
|
|
|
| ||
The color of a recalled image | The lens was affected by direct light | Be careful not to expose the lens to | — | ||
differs from that of an image | from a light source such as the sun. | any direct light. |
| ||
shown when [S] was pressed. |
|
|
|
|
|
|
|
|
|
|
|
An image cannot be | 1 | The operating frequency selected | 1 | Select the exact same operating | — |
transmitted or received. |
| on the transceiver did not match |
| frequency as the other party. |
|
| 2 | that of the other party. | 2 |
|
|
| The selected SSTV mode did not | Select the same SSTV mode as | 7 | ||
| 3 | match that of the other party. | 3 | the other party. |
|
| The | Check the connections between | 5 | ||
| 4 | not been correctly connected. | 4 | the |
|
| An interference signal was | Move to another frequency with | — | ||
|
| received. |
| the other party. |
|
|
|
|
| ||
No audio is output from the | AF Mute is OFF. | Switch AF Mute ON. | 13 | ||
|
|
|
|
| |
|
|
|
|
|
|
15
