Kenwood VC-H1 instruction manual Operating Basics, Switching Power ON/OFF, Selecting a Sstv Mode

OPERATING BASICS

SWITCHING POWER ON/OFF

1 Slide the PWR switch upward to turn the power ON.

• The TX/RX indicator lights green.

2To turn the power OFF, slide the PWR switch downward.

SELECTING A SSTV MODE

To correctly transmit or receive images, you and the other party have to select the same SSTV mode. So first consult with your party about the mode to be used. You can select either Robot (color) 36 or Fast FM; the factory default is Robot (color) 36.

Note: The Fast FM mode is available only when using a TM-255, TM-455, TM-733, TM-V7, or TM-G707 transceiver; 9600 bps must be selected on the transceiver as the data transfer rate. For details, contact your authorized KENWOOD dealer, customer service, or service center. In Fast FM mode, the VC-H1 does not output audio from the speaker while receiving an image, and does not function as a speaker microphone.

Press [TX]+ POWER ON to switch the mode.

•The FAST FM indicator shows which mode is selected.

Lights red: Fast FM

Goes out: Robot (color) 36

The VC-H1 is also compatible with the following modes. See “RECEIVING IMAGES” {page 10} and “COMPUTER CONTROL” {page 17}.

•	Robot (color) 72	•	AVT 90
•	AVT 94	•	Scottie S1
•	Scottie S2	•	Martin M1
•	Martin M2

7