Kenwood VC-H1 Sstv mode switch, Inquiry of current Sstv mode, Call sign superimposition

■Commands List

Pin No.	Pin Name	Function
q	STS	SSTV mode switch/
		Inquiry of current SSTV mode
w	STC	Call sign superimposition
e	STM	Message superimposition
r	STR	RSV superimposition
t	STP	Image capture
y	STT	Image transmission

■Commands Format

Note: Use capital letters to enter a command name.

A STS command should consist of a command name, space, parameter, and [CR]; ex. STS 0 [CR].

Parameter	Function	Parameter	Function
	Inquiry of
Non	current SSTV	4	Scottie S1 1
	mode
0	Robot 36	5	Scottie S2 1
1	Robot 72	6	Martin M1 1
2	AVT 90 1	7	Martin M2 1
3	AVT 94 1	8	Fast FM

1Compatible

A STC command should consist of a command name, space, call sign, comma, color parameter, and [CR]; ex. STC JA1YKX, 1 [CR]. You can enter up to 8 characters as a call sign, using “0” to “9”, “A” to “Z”, “/”, “-”, “!”, “?”, or a space. The parameters of call sign colors are listed below:

Parameter	Function	Parameter	Function
0	black	4	green
1	blue	5	light blue
2	red	6	yellow
3	purple	7	white

The formats of STM and STR commands are the same as of STC commands except that a message or RSV replaces a call sign; ex. STM CQ SSTV, 2[CR]. The characters which can be entered are also the same as for STC commands.

•Up to 9 characters can be entered as a message.

•Up to 10 characters can be entered for a RSV.

STP and STT commands consist of a command name and [CR]; ex. STP[CR].

18