General features

English

VolumeIncreasing Volume:

Press the u button to turn up the volume.

Decreasing Volume:

Press the d button to turn down the volume.

•When the front panel has been slid, it might interfere with the shift lever or something else. If this happens, pay attention to safety and move the shift lever or take an appropriate action, then operate the unit.

•Do not apply excessive force to the front panel after it slides.

NOTE Protect function for the panel

The panel may move due to the protection mechanism, if any buttons are pressed with excessive force while the panel angle is adjusted to the slide position.

Loudness

This function amplifies low and high tones when the volume is turned down.

The LOUD indicator lights up when the loudness function is on.

Turning Loudness On/Off:

Press the LOUD button for at least one second to switch the loudness on and off.

Panel Angle Adjustment

You can adjust the front panel angle for easy viewing.

Sliding the panel:

Each time you press the ANG button for at least one second, the front panel will slide to three positions step by step.

NOTE

If the power is turned off, the front panel will close automatically. When you turn the power back on, the panel angle will return to the adjusted angle position.

Closing the panel:

Press the ANG button for at least one second repeatedly until the front panel closes.

2CAUTION

•Take care that your fingers and so on do not get caught during the slide operation of the front panel.

Clock Adjustment

Adjust the clock.

1Press the CLK button to select the clock mode.

Once the clock mode is selected, "CLOCK" will be displayed.

Adjusting the Clock:

2Press the ADJ button for at least two seconds.

"CLOCK ADJ" is displayed, and then you can adjust the time.

3You can adjust hours with the FM/AM button, and minutes with the 4/¢ button.

NOTE To set the minute to "00"

Press the S/S button for at least one second to set the minute to "00".

Pressing this button while the minute is below "30" rounds it off, and while the minute is "30" or more rounds it up.

4Press the CLK button to end the clock adjustment. Adjusting the minute restarts the second counter from 00.

— 10 —