General features

English

"BASS EXT" : Switch the Bass Extend mode on/off. Setting values: ON / OFF

(When the bass extend mode is set to on, low frequency response is extended by 20%.)

NOTE

This mode is available only when the Sound coordinate system is on. (page 35)

"TRE f" : Adjust the center frequency of the treble. Setting values: 10.0 / 12.5 / 15.0 / 17.5 kHz

NOTE

This mode is available only when the Sound coordinate system is on. (page 35)

"TREBLE" : Adjust the treble level.

Setting values: - 6 – + 6

"BALANCE" : Adjust the balance level. Setting values: Left 15 – Right 15"FADER : Adjust the fader level. Setting values: Front 15 – Rear 15
"N-F LV" : Adjust the Non-fading output level. Setting values: - 35 – + 5"AMP CTRL" : Set the amplifier bass increment. Setting values: OFF/1/2

NOTE

As of December 1998, the power amplifiers controllable by the main unit are as follows: KAC-X501F/PS501F/X401M/PS401M/X301T/PS301T/X201T/PS201T

Storing your sound settings:

Press a preset button (#1-6) for at least two seconds except during the bass center frequency, bass level, bass quality factor, bass extension, treble center frequency, and treble level adjust mode.

NOTE

•This mode is available only when the Sound coordinate system is on. (page 35)

•The settings you can preset are, bass center frequency, bass level, bass quality factor, bass extension, treble center frequency, and treble level.

Recalling your sound settings:

Press a preset button (#1-6) except during the bass center frequency, bass level, bass quality factor, bass extension, treble center frequency, and treble level adjust mode.

NOTE

This mode is available only when the Sound coordinate system is on. (page 35)

— 14 —