Kenwood Z919 HOLD, ERROR, ERROR, ERROR, H HOLD, NO NAME, NO TEXT, BUS-E50, BUS-W02, BUS-W08, READING, The CD player is malfunctioning, ]Load a disc into the disc magazine

NO NAMENO TEXTERROR 04

ERROR 77

ERROR 99

HOLD

•An attempt was made to display the name of the station being received but it was not set in memory.

•An attempt was made to display the name of the disc being played but it was not set in memory.

An attempt was made to display the track/disc title of the CD during play, but the CD has no texts.

No disc has been loaded in the disc magazine.

]Load a disc into the disc magazine.The CD is quite dirty. The CD is upside-down. The CD is scratched a lot.]Clean the CD and load it correctly.The unit is malfunctioning for some reason.

]Press the reset button on the unit. If the "ERROR 77" code does not disappear, consult your nearest service center.

Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason.

]Check the disc magazine. And then press the reset button on the unit. If the "ERROR 99" code does not disappear, consult your nearest service center.

The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation.

]Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the disc will start playing again.

H HOLDBUS-E50BUS-W02BUS-W08READING

The protective circuit in the unit activates when the temperature inside the unit exceeds 60°C (140°F), stopping all operation.

]Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the disc will start playing again.

The CD player is malfunctioning.]Eject the CD and try inserting it again.

Contact the Kenwood dealer if this indicator continues blinking or the CD cannot be ejected.

More than two center units are connected.The number switches of two disc changers connected are set to the same number.

]You can use without any problem, by setting a switch number of one disc changer to "1" and another to "2". More than two TV monitors are connected at the BUS.

The unit is reading the data on the disc.

]Normal play will be performed after completion of reading the data on the disc.

CD-ROM AREA The unit is replaying the data area on the CD-ROM.

]You can not hear sound during this indication appears. Cannot display format The unit failed to read the MP3 folder name and file name.

— 47 —