Kenwood Z919 Timer, Stopwatch

Stopwatch

You can use the clock as a stopwatch.

1Press the CLK button to select the stopwatch mode.

Once the stopwatch mode is selected, "STOP WATCH" will be displayed.

When you enter the stopwatch mode, the round sound level indicator changes its display to indicate the stopwatch mode.

2To start the measurement Press the S/S button.

3To stop the measurement Press the S/S button.

NOTE If you want to clear the time

Press the S/S button for at least one second.

Then the time indication will return to "0:00'00"0".

4To restart the measurement

Press the S/S button to restart the measurement.

Timer

You can use the clock as a timer. Once you set a time, the timer will beep when the set time has past.

1Press the CLK button to select the timer mode.

Once the timer mode is selected, "TIMER" will be displayed. When you enter the timer mode, the round sound level indicator changes its display to indicate the timer mode.

Time Setting:

2Press the ADJ button for at least two seconds.

"TIMER ADJ" is displayed, and then you can set a time for the timer.

3You can adjust hours with the FM/AM button, and minutes with the 4/¢ button.

NOTE To set the time to "0:00"

Press the S/S button for at least one second to return the time to "0:00".

4Press the CLK button to end the time setting for timer.

5To start the timer

Each time you press the S/S button, the timer will start and

stop.

When you start the timer, the indicator will light up and the time counting will start.

NOTE If you want to clear the setting time of the timer Press the S/S button for at least one second.

Then the setting time of the timer will return to the time set in the step 3.

6When the time set in the step 3 has passed The timer will beep for five seconds.

You can immediately stop the beep by pressing the S/S button, or leave it without any action for about 5 seconds.

— 11 —