Function set system

English

Function Set System

To accommodate a greater number of functions, a function set system has been employed for making settings. Press the AUD button to enter the function set mode and then display the function to make the setting.

1Press the SRC button repeatedly and switch the display to “ALL OFF” to enter the standby mode.

2Press the AUD button.

"FUNCTION SET" is displayed when the function set mode is entered.

The function that you can adjust is indicated with the current settings displayed.

3Selecting function to set

Press the FM button to search through the functions until you see the one you want to adjust in the display.

Press the AM button to search through the functions backward. Example: If you want to switch the setting of the touch sensor

tone function from on to off, first search through the functions until you see "BEEP ON"in the display.

4Changing setting for currently displayed function Press either the 4 or ¢ button.

The setting will change for each function.

Example: The setting of the touch sensor tone will switch from on to off, and "BEEP OFF" is displayed.

5Ending the function set mode Press the AUD button.

Touch Sensor Tone

This function produces a beep sound that accompanies button operation. It can be switched on or off.

Display and setting:

"BEEP ON" : Beep setting is on.

"BEEP OFF" : Beep setting is off.

NOTE

The beep sound is not output from the preout jacks.

Dimmer

You can dim the display.

Display and setting:

"DIMMER LOW" : The dimmer setting is low.

"DIMMER MIDDLE" : The dimmer setting is middle.

"DIMMER HIGH" : The dimmer setting is high.

NOTE

The dimmer function is not available for units if the dimmer wire is not connected.

Silent Display

If you feel that display amount on the screen is too much, you can reduce the display amount.

Display and setting:

"SILENT ON" : The silent display function setting is on.

"SILENT OFF" : The silent display function setting is off.

— 34 —