CD/External disc control features

English

Direct Disc Search (Function of disc changers with remote) (See page 35)

Using the remote, directly input the disc number that you want to listen to.

1Using the number buttons on the remote, input the number of the disc that you want to listen to.

The selected disc number will blink in the display for 10 seconds.

If you make no further input in the 10-second period, the number entry mode will automatically be canceled.

NOTE

•Input "0" to select disc 10.

•If you input more than two numbers all at once, a search will be made only of the last number input.

2Press either the DISC+ or DISC– button while the number inputted is blinking.

The disc starts playing.

Canceling Direct Disc Search While It Is Operating:

Press the 38 button.

Presetting Disc Names

Store the names of discs to be displayed when played.

1Play the disc whose name you want to preset.

2Press the NAME.S button for at least two seconds. "NAME SET" is displayed and the disc name preset mode is entered.

The cursor blinks in the position where character input can be made.

3Press either the 4 or ¢ button to move the cursor to the desired position.

The 4 button moves the cursor to the left, and the ¢ button to the right.

You can also move the cursor left or right by pressing the 4 or ¢ buttons, respectively, on the remote.

4Each time the 38 button is pressed, the characters to be entered change as listed below.

Press the FM or AM button to display the desired character. Characters that can be displayed are as follows:

Alphabet (upper case): A - Z 0 - 9 ! " # $ % & ' ( )

＊+ , - . / : ; < = > ? @ [ ¥ ] ^「 」・

Alphabet (lower case): a - z 0 - 9 ! " # $ % & ' ( )

＊+ , - . / : ; < = > ? @ [ ¥ ] ^「 」・

NOTE Direct Alphabet Input (Function of remote)

You can directly input letters using the number/letter entry buttons on the remote.

Example: Use the following table to enter the name "DANCE".

Character

Button to press

# Times pressed

 

 

 

“D”

#3

1

“A”

#2

1

“N”

#6

2

“C”

#2

3

 

 

 

“E”

#3

2

5Continue steps 3 and 4 until all the characters are chosen for the name.

NOTE

You can enter up to 12 characters for each name.

6Assigning Names

Press the NAME.S button on the unit or the OK button on the remote.

The disc name is stored and the disc name preset mode is canceled.

If you make no entry in a 10-second period, the name will be stored with the characters input so far.

— 24 —