Kenwood Z919 Direct Access Tuning, Station Name Preset Play (SBF), Canceling Direct Access Tuning:, 2Once the name is displayed for the station you want to listen to

Station Name Preset Play (SBF)	(Function of Remote)
	(See page 35)

You can search for the station for any station if its name has been preset using Station Name Preset.

1Press the SBF button.

“SBF MODE” will be displayed once the station name preset play mode is entered.

The names of the stations stored in the band currently listened to are displayed in the following order for five seconds each: = FM1 Ô FM2 Ô FM3 Ô AM +

Each time you press the ¢ button, the station display switches in the forward direction.

Each time you press the 4 button, the station display switches in the reverse direction.

Stations whose names have not been stored will be displayed as frequencies.

NOTE Changing the Displayed Band

Pressing the FM button switches between the FM1, FM2, and FM3 displays, in that order.

Pressing the AM button switches to the AM display.

2Once the name is displayed for the station you want to listen to

Press the OK button.

Reception starts of the displayed station, and the Station Name Preset Play mode ends.

Direct Access Tuning	(Function of Remote)
	(See page 35)

Use the remote to select frequencies directly.

1Select the band by pressing the FM or AM button.

2Press the DIRECT button.

In the display, "----" blinks for 10 seconds.

If you make no input in the 10-second period, direct access tuning is automatically canceled.

3Enter the frequency of the desired station while the display is blinking.

If you want to listen to an FM station at 92.1 MHz, for example, press 9, 2, and 1.

If you want to listen to an AM station at 530 kHz, for example, press 5, 3, and 0.

NOTE

You cannot enter frequencies above or below what a band can receive.

Canceling Direct Access Tuning:

Press the DIRECT button again.

— 19 —