External TV control features

English

NOTE When the TV/CD player VZ907 is connected

When the TV/CD player VZ907 is connected, the TI button appears on the Source control screen of the TV monitor.

Since the traffic information function is not installed in this unit, you can not use the TI button on the TV monitor.

Tuning

1Press the SRC (source) button repeatedly to select the external TV control mode.

"TV" is displayed when the external TV control mode has been selected.

2Selecting Bands and Video Inputs

Press the FM button to select the TV band.

Each time you press the FM button, the TV band switches between the TV1,TV2,Video1, and Video2.

3• Auto Seek Tuning (AUTO 1)

Press the ¢ button to seek increasing channels. Press the 4 button to seek decreasing channels.

•Preset Station Seek Tuning (AUTO 2)

Press the ¢ button to move to the next preset station (the one with the next highest number), and the 4 button to move to the last preset station (the one with the next lowest number).

•Manual Tuning (MANUAL)

Press the ¢ button to increase the channel by one step. Press the 4 button to decrease the channel by one step.

NOTE

You can select the Tuning mode of AUTO1, AUTO2, or MANUAL at the television side. For details, please refer to the instruction manual for the television.

Station Preset Memory

Store the channel of a TV station. You can then recall that station with a single touch of a button.

1Select the band/station that you want to have stored.

2Press the button (#1-6) that you want to use for the station, for at least two seconds.

The button number blinks once in the display to indicate that the data has been stored.

NOTE

You can store six stations in each of the TV1 and TV2 bands.

Auto Memory Entry

You can automatically store all the receivable channels in the band currently being listened to, and then recall them with the touch of a button later. This function is especially useful when you are travelling and do not know what stations are available. Up to six channels can be stored this way.

1Select the band for auto memory entry.

2Press the AME button for at least two seconds to start auto memory entry.

The numbers of the preset station buttons are shown in order. When all the stations in a certain band are stored in the preset memory, the auto memory entry stops. The tuner then plays the last station received.

Preset Tuning

You can recall a station being preset in preset station buttons (#1-6).

Recalling a Preset Station:

Press the preset station button (#1-6) for the desired station. The number of the recalled station is displayed.

— 32 —