English

Installation■Assembly

Accessory2

Accessory 2

Accessory 4

 

Fit the projections on both

 

sides of the Accessories 4

 

into the slits on the

 

Accessory2.

 

Accessory 6

 

Accessory 7

Accessory5

(Used when there

(M5 ⋅ 6 mm)

are rubber bushes on

NOTE

the rear panel of the

radio.)

 

Accessories5 should be screwed in firmly.

If it is not properly secured, it may rub against the mounting sleeve when the unit is removed, making itself impossible to remove.

2CAUTION

•Be sure to press the reset button after installation.

•During installation, do not use any screws except for those provided. The use of different screws might result in damage to the main unit.

•Damage may occur if a screwdriver or similar tool is used with excessive force during the installations.

•When performing a check of the CD operation prior to installation, place this unit in a hirizontal position and perform a loading/eject of the CD.

NOTE

•This installation method is a reference example.

•Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).

NOTE How to install the rubber bushes (Accessories8 and 9) When installing, adjust the rubber bushes so that the position of the main unit is aligned with the position of the radio.

Cut off the end using a cutter.

Installation example

Assemble the stepped screw (Accessory6), the joint nut (Accessory7), the rubber bushes (Accessories8 and 9), and secure them to the rear panel of the unit.

Accessory 6

Accessory 9

Accessory 8

Accessory 7

— 42 —