14

Appendix A Configuration Options

;remove semicolon from next line ;if you wish to use INITPROG ;initprog 80

Edit the line with "initprog 80" to delete the semicolon. The two lines should now read:

;remove semicolon from next line ;if you wish to use INITPROG initprog 80

5.Save the ADF file back out to the disk.

6.Exit the editor.

Now you can run the Set Configuration program and set the Operating Mode to "INITPROG or IDD." The program will automatically install the initializer onto your hard disk.

I/O selects

Default: 390h

Options: Too numerous to list here

This is the base I/O address for the MCMaster's own control ports. The Set Configuration program will display an asterisk next to this address if there is a conflict with a previously installed adapter. Press [F6] until you see an address that does not conflict.

Arbitration Level

Default: Level_14

Options: Level_0 through Level_13

The Micro Channel includes logic to arbitrate bus requests among multiple adapters: each adapter card must have its own arbitration level. If this level conflicts with another adapter, you can change it to any other level.

Kingston Technology Company

MCMaster User’s Guide - Rev. B06

Page 20
Image 20
Kingston Technology MC133PD manual Selects, Arbitration Level