46 | Appendix C Troubleshooting |
message saying "Could not find the Intel Above Board 2 Plus initialization file," either the set configuration program removed it or you have the newer version of the Above Board. If it's been removed, rerun SOFTSET and then SETINIT to link in the Above Board and MCMaster initializers in the right order.
Changing the amount of memory on the MCMaster has no effect. However, if you change the amount of memory on the Above Board, you'll have to rerun SOFTSET. Please refer to section 4 below.
3.Installing the Above Board with the MCMaster installed
1.Boot your system with the Backup Reference diskette inserted in Drive A. During the MCMaster logo and
2.From the main menu, use the Copy an option diskette function to copy the ADF files from the INTEL diskette.
3.Turn you machine off and install the INTEL board.
4.Insert the Backup Reference diskette in Drive A: and boot your system.
5.Configure the INTEL board according to the instructions supplied with the board.
6.Once the INTEL board is configured, from the main menu, select Set Configuration and then select Change Configuration.
7.Change the "Operating Mode" field on the MCMaster to "INITPROG or IDD."
8.Verify that no ROM/RAM conflicts exist.
9.Save the configuration by hitting F10 and [Enter]. Then exit the Reference menu completely and let the system reboot.
10.Once the system boots, insert the INTEL option diskette and run the SOFTSET program. Make sure to set Expanded Memory to 0.
Kingston Technology Company | MCMaster User’s Guide - Rev. B06 |
