NJ750 Training Guide
7.Larger than normal ink droplets (0.5- 2 mm) on the media are caused by excessive pressure in the cartridge. Ensure the cartridge only has 20 ml of ink inside and the ink reservoirs do not have more than 400 ml of ink inside. Printer stand surface or floor area must be level and flat.
8.Microbanding is typically caused by incorrect printer calibrations or low pass printing. Print pass mode of 4 or lower may cause banding. Ensure all calibrations are performed correctly. Defective or clogged cartridges may also cause microbanding. Perform printer calibrations and replace associated cartridge (s) to verify.
208 Jet Cartridge
18
