NJ750 Training Guide

Alternate DNS Server- 192.168.254.190

Leave the Gateway blank. See Figure Below.

NOTE: To configure the SEH print server you will have to load the InterCon NetTool. Insert the InterCon CD into your CD drive or obtain from:

http://www.seh.de/

2. PRINT SERVER PROTOCOL SETUP

Run the CD.EXE from the Autorun folder. Once started press the top button(British Flag). Press the InterCon-NetTool button to install. Follow the prompts and finish the installation.

1.Once loaded activate the InterCon-NetTool. The SEH will Auto-Assign itself an IP address, using DHCP, within the IP range of your PC. To change the IP address and Subnet Mask, double click on the IP address or select Properties from the Edit pull down menu. See figure below.

27

Page 27
Image 27
Kodak 750 manual Print Server Protocol Setup