3 - 7
A-41069 January 1993
Adjusting the feed shelf
position Before you begin feeding documents into the S canner, adjust the
position of the Feed Shelf:
To automatically feed multiple documents, the feed shelf should be in
the raised position (as shown above). To raise the feed shelf, grasp the
notch and lift the feed shelf. Swing the h eight adjustment legs out and
insert them into the groove on the work sh elf.
To hand feed documents (one at a time), t he feed shelf should be in the
down position (not shown). To lower the fe ed shelf, grasp the notch and
lift the feed shelf until the height adjust ment legs are no longer resting in
the groove on the work shelf. Tuck the he ight adjustment legs in and
gently lower the feed shelf into positio n, level with the work shelf.
Height
Adjustment
Legs
Groove
Notch
Feed Shelf
Work Shelf